Blade | Vinyl Cutter Plotters

Changing the Blade in a GX-24 Roland Cutter

Changing blade in a GX-24 Roland Vinyl Cutter

Roland Stika Vinyl Cutter: Changing the blade on the SV-12

This video will demonstrate how to change the cutting blade on a Roland Stika SV-12 vinyl cutter plotter. The steps are the same for the SV-8 and SV-15 Roland Stika vinyl cutters also.

Graphtec 30° Cb15 Craft Robo Vinyl Cutter Plotter Blade, Set of 5

Compatible with CB-15UB and CB-15U-K30, All CE and FC Series, Vinyl Express Q Series, ROBO Cutter, Blue Knob Holder – PHP32-CB09N-HS and Older Models Holder (e.g. FC5100) – PHP31-CB09-HS Degree: 30° Diameter: 1.5mm Offset: 0.75mm High Quality Extra Long Life Product DescriptionFor cutting small characters to the media of vinyl chloride mono. Suitable for cutting [...]

Roland 45° Cricut Anagraph GCC Vinyl Cutter Plotter Blade, Set of 30

Compatible: Roland (ZECU 1001, all Roland Camm`’s, CM-12, PVC900/910, CM-24, PNC 1100, 1200/1210, 1400/1410, 1850/1860, 5000, ColorCamm , CAMMJET, PC60, PC600, Mdx 15 diameter 0,2 or 0,3), ANAgraph Express (AE Series), GX-24, GCC Sable, Roland Stika 12, Vinyl Express Panther, Lynx; jsi p-24; US Cutter MH721; Pro Cutter CR-630; US cutter laserpoint; Seiki; Allen Datagraph; [...]

Roland 45° Cricut GCC Vinyl Cutter Plotter Blade, Set of 6

Graphtec 45° Craftrobo Vinyl Express Cutter Plotter Blade, Set of 10

Compatible with CB-09UA and CB-09U, All CE and FC Series, Vinyl Express Q Series, ROBO Cutter, Blue Knob Holder – PHP32-CB09N-HS and Older Models Holder (e.g. FC5100) – PHP31-CB09-HS. Degree: 45° Diameter: 0.9mm Offset: 0.45mm High Quality Extra Long Life Additional type of blade to the media adhesive color (standard vinyl). Suitable for cutting media [...]

Roland 60° Anagraph GCC Vinyl Cutter Plotter Blade, Set of 6

Why does the blade on my vinyl plotter/cutter rip the vinyl?

Every time I try to design a cut in the film, the blade is too deep or moving the wrong direction, vinyl (not sure which is the cause) and the tears well head to the cut end of the film, instead of only the surface of the vinyl. I tried to adjust the depth of [...]